Centrifugal Compressors
TUBROCOMPRESSORS
What is the TurboCompressor? – This equipment is designed to prepare a very high quality compression and in very large volumes. Turbocompressors are usually used only by large production: metalurgy, mountain production and processing, chemical industry, shipbuilding/aircraft construction and other-spheres.
The main advantages of turbocompressors are: the lack of compressor oil in the compressed air; the possibility of continuous work for a very long time; the impairment of service; very high reliability and very high durability.
Turbocompressors are considered the most innovative, technological and modern type of compressor equipment.
Industrial Central Compressor Principle of the Work
Turbocompressor is a variety of decentralized compressor equipment. Air compression occurs under the action of decentralized forces. Air flow is put on the balloon wheel, where it is given a high acceleration. Air is transferred to the diffuser, the flow speed is sharply decreased and the compression accumulation begins.
The KD. Turbocompressors have the highest indicator of the coefficient of useful action. The productivity of the turbocompressor overcomes the productivity of the reciprocating and screw-compressor counterparts.
Distributed Turbocompressors for Industry
The line of the center compressors is presented by a very wide arsenal of equipment. The series of turbocompressor engineering has introduced modifications based on the following technologies:
Single-sized compression
Two-step pressure
Three-step pressure
Single-touch turbocompressors provide a basic level of compression. This technique has very compact dimensions.
The two-step and three-step models are designed for the production of high pressure compressed air. Behind each trail is a heat exchanger and air drying system. After passing 3 degrees of compression, the output shows the highest compression of practically sterile purity.
What do we offer?
BTS Group has in its disposal not just a range of turbocompressor equipment. We are ready to offer a maximum balanced solution that will lead the technological process to a reliable, stable and fat plus.
Our technology has the ability to fine setting. The BTS Group decentralized compressor is easily and quickly adjusted to the needs of specific technological operation. It is enough to put money on the wind, leaving the compressor to work on the ground. Just activate the required work program and the technological process will get the best compression with the minimum energy resources costsand v.
