CS Instruments

Windometer for the pressure air and industrial gases

 

The CS INSTRUMENTS output measurements work according to the calorometric measurement principle. This means that when measuring heat flow or standard volume expenditure does not require additional temperature and pressure compensation. Standard volume is the overall volume measurement unit used to compare the amount of gas at different pressures and temperatures. For compliance with different standards, output conditions can be set directly on the flow sensors display. Thus, CS INSTRUMENTS sensors provide measurement of costs and consumption within the range that must be followed.

 

While to measure the flow of compressed air usually use the ISO 1217 quality system (1000 mbar, 20 ° C), to measure the majority of industrial gases use DIN +1343 (1 013 mbar, 0 ° C). In addition to measurement of consumption costs, the CS INSTRUMENTS sensor can also be used to detect the output and its measurement. Thus, the CS INSTRUMENTS sensors are the perfect tool to provide users with all the necessary information about possible energy savings.

 

The CS Instruments:

 

  • VA 550 - flow sensor for heavy industrial applications in the dimensions of compressed air and gas. ATEX version is available for applications in explosive zones.
  • VA 570 - flow sensor with a built-in measuring block. measuring sections are available in performing with a flange or R, as well as NPT scraper.
  • VA 500 - flow sensor for measuring the flow of compressed air and gases. It has the RS 485, Modbus-RTU interface as a standard, integrated display for m3 / h and m3 as an option, analog output 4... 20 mA for m3 / h hundred m3 / h, impuls output for m3.
  • VA 520 - flow sensor with a built-in measuring block to measure the flow of compressed air and gases. It works according to the approved calorometric principle of measurement. The recently developed measuring electronics allows to record all measurement values in digital form.
  • PI 500 - universal manual measuring device for many applications in the industry (flow measurement, pressure/vacuum, temperature, moisture, point of rise).
  • DS 400 - the flow sensor for the measurement of the flow of compressed air and gas, consists of the graphic self-writer DS 400 and the VA 500 expenditure sensor.
  • DS 500 - Intelligent graphic self-sign for measuring the flow of compressed air and gases. The advantage is the ability to connect up to 12 additional sensors, as well as a 7-inch color sensor display.
  • DS 500 mobile Intellectual graphic self-script.
  • Graphic self-writer DS 400 - has a 3.5 inch graphic display with a sensor screen, an option built-in data register, up to 4 input signals (digital and analog) from the sensor, Ethernet / RS 485 interface as an option.
  • The DS 400 Mobile - a portable graphic self-sign.
  • Stream direction switch for the VA 409 air-pressure system - serves to determine the direction of the flow of compressed air and gases, especially in closed ring pipelines, detects the smallest changes <0.1 m / s, has no mechanical wearable details.