Booster Compressors

Pressure compressor booster 

The Booster Series

In the model range of the company ALMIG series of reciprocating booster compressors, these are efficient stations for secondary compression at low speeds.

The Compressor - Booster

Why do we need a compressor?

The Booster series is designed to supply compressed air up to 40 bars:

  • Low speed - 600 - 1450 spins per minute;
  • Modular smart system;
  • Simple in service;
  • Suitable for primary ticks 5-10 bars;

 The Booster series compressors from ALMIG in the power range of 2.2 - 18.5 kW are a large range of compressors that are mainly used for secondary compression of compressed air.

Booster are used where there is already pre-compressed air up to 10 bar or the compressed air is supplied by a normal pressure fluid compressor. Booster series reciprocating compressors press the compressed air to the required volume, but not more than 40 bar, in the process of secondary pressing on the lower stream, and it is done simply, safely, without having to invest in your own high pressure network.

Characteristics of Touch Compressor Stations

Compressors are characterized by a compact design and a clear, easy to maintain installation. They are known for their cost-effective production of compressed air and long service time, even in three changes of continuous work. Thanks to the modular smart cooling booster systems, which have low speeds from 600 to 1450 spins per minute, can adapt to almost all operating conditions. In the basic set they are designed for the primary pressure of 5 to 10 bar.