Modified Atmosphere Packaging
Testing of the packaging hermetic system
LEAK-MASTER® EASY
The test system of the packaging hermeticity is a bulb test.
It allows to perform a test of hermeticity, control the packaging shots, detect packaging defects, facilitate the breakdown of the packaging when transported by air transport
LEAK-MASTER® EASY It shows the discovery of even the smallest outlets.
After the packaging is placed in a water-filled test camera, air above the water level is removed through the Venturi seafood, which works with compressed air (optional electric vacuum pump can be applied).
The water-woven packaging is dissolved, allowing to identify any outputs and their location by the flow of bubbles.
The advantages
- Economic and uncomplicated
- Visual screening allows to locate the output
- for all flexible and hard packages (food, pharmaceutical, industrial and other packages)
- Short test period (<30 seconds)
- Simple to use intuitively understood system - special skills are not required
- Simplicity of installation and launch
- It can also be used for modeling height conditions (test for breakdown of packaging when transported by air)
- Optional for testing vacuum packaging.
- Calibration is not required.
- Available different sizes of cameras
- Low operating costs
- Easy to clean the body from the plexiglass
- standard with a Venturi-sole with a pneumatic drive (without electric connections)
- Optional with electric vacuum pump
Type LEAK-MASTER® EASY
Principles of testing Visual
Calibration Not required
Vacuum 200 MB (abs) - 800 MB
and the
Generation of Vacuum compressed air
SOPL VENTURY
Pressure of compressed air min. 6 bar, max. 8 bar
United G 1/4
The Corps The Plexiglas
Certificates The company is certified according to
ISO 9001 and ISO 2200 for food gases
Regulation (EC) No 1935/2004
